職責描述:
1.負責電鍍設備開發和迭代;
Responsible for ECP tool development and iterative optimization;
2.與機械、電氣、軟件等設計部門合作,提供設計建議和設備標準;
Responsible for co-working with mechanical, electrical, software design department, to provide design suggestion and tool standard;
3.負責設備硬件和軟件測試標準(Check Sheet),安裝調試流程(SOP),維護保養(PM)標準文件制定和撰寫;
Responsible for tool hardware and software test check sheet, installation operating procedure (SOP), preventive maintenance (PM) formulate and write;
4.負責售后服務工程師培訓;
Responsible for tool service engineer training;
5.作為產品組技術專家牽頭解決設備技術問題;
As the production team expert lead to solve tool hardware technical issue。
任職要求:
1.5年以上晶圓廠(Fab)電鍍設備工程師,或設備商售后服務工作經驗;
Over 5years working experience as Fab plating hardware engineer or tool vendor service engineer
2.掌握半導體電鍍設備硬件構造,原理和系統架構為佳;
Master in semiconductor plating tool Structure, mechanism and system architecture is preferred;
3.熟悉電鍍工藝原理;
Familiar with plating process mechanism;
4.有電氣和機械相關基礎知識;
Expert in electrical and mechanical relevant basic knowledge;
5.有設備技術標準文件制定經驗優先;
Experience in tool technical standard formulate and write is preferred;
6.本科以上理工科相關專業;
Bachelor degree and above, major in engineering;
7.擅長溝通并能適應一定程度加班;
Good at communication and for overtime work to complete tasks on time。