Responsibilities 職責:
- Single contact for plants concerning quality of purchased parts, Fast and efficient problem solving in complaint-management and guiding taskforce at supplier and escalation management after release.
- Responsible for Claim Management of incoming inspection and production line.負責進貨檢驗及生產線供應商質量問題投訴及處理.
- Analysis Supplier quality problem and driving supplier quality improvement.分析處理供應商質量問題并主導供應商改進活動.
- Supplier quality 8D report management.供應商8D報告管理.
- Measuring comparison and counter measurement within the scope of initial sampling.
- Initial Sample inspection and measurement plan.初始樣件檢驗計劃及測量安排。
- Initial sample inspection reports management.初始樣件檢驗及報告管理。
- Responsible for risk-oriented incoming inspection
- Supplier parts incoming inspection plan definition and management.供應商零件進貨檢驗計劃定義及管理.
- Monitoring data for incoming inspection and inform supplier for limitation alarming and process adjust.監控進貨檢驗數據,如有極限問題及時通知供應商進行調整.
- Reimbursement of defect costs in coordination with commercial purchasing and claims management
- Cost data due to supplier quality issue collection calculation with related departments.與相關部門一起對供應商質量問題引起的成本數據進行收集和計算.
- Cost charge back from supplier site on time.及時將供應商問題造成的質量損失索賠.
- Other works the manager arranged.
Qualification required 資格要求
- Bachelor degree of mechanical engineering or related technical discipline or above.
- 機械或相關專業本科以上學歷。
- Minimum 3 years working experience in supplier quality management in Europe or America company in automobile industry.
- 3年以上歐美汽車行業供應商質量管理相關工作經驗。
- Good at quality tool application, such as SPC, FMEA, 8D and MSA, etc..
- 熟悉質量控制工具SPC,FMEA,8D,MSA等及應用。
- Thorough understanding of quality standards (e.g. ISO 9001:2015, IATF 16949:2016, etc.)
- 理解并掌握質量標準(ISO9001:2015, IATF16949:2016)
- Able to read the technical drawing.
- 能夠讀懂技術圖紙。
- Good command of English both in writing and speaking.
- 良好的英文書寫和溝通能力。
- Good communication skill and team spirit, and strong team driver for process and system improvement.
- 優秀的溝通能力和團隊合作意識,能夠很好地推動工作流程和體系的改善。
Other其它:
- Good health.
- 身體健康。
- Good professional ethics.
- 良好的職業道德。
- Strong sense of confidentiality.
- 較強的保密觀念。
- Care about details and precision.
- 注重細節及精確性。
- Self-motivated and able to work under pressure.
- 能夠自我激勵并承受工作壓力。
- Able to work overtime if necessary.
- 必要時可以加班。
- Hold positive attitude whenever facing different opinions or other problems and take necessary actions to facilitate solutions.
- 出現意見不合或其他問題時能夠以積極的態度應對,并采取行動積極配合以促進問題的解決。
職位福利:五險一金、績效獎金、帶薪年假、節日福利、免費班車、交通補助、彈性工作、住房補貼