雇員點評標簽
職位描述
汽車座椅汽車方向盤汽車通風系統結構設計總布置設計工藝設計新能源汽車乘用車商用車英文讀寫catia汽車熱管理系統CATIACAD
ESSENTIAL FUNCTIONS AND RESPONSIBILITY:
Design and develop seat comfort systems (seat heaters, comfort cools etc.) in direct contact with customer technical personal according to Gentherm APQP/PCP procedures as below:
依照捷溫如下APQP/PCP流程，直接與客戶技術人員交流，設計和開發包括座椅加熱通風等功能的座椅舒適系統：
1. Design of heater/ VTB/Steering wheel heater: heater/通風袋/方向盤加熱墊的設計
- Based on customer input- specification/ technical requirement / drawing/ 3D data …to prepare and release master design, create BOM, define package agreement;
- 根據客戶輸入-標準/技術規范/圖紙/3D 數據 …來準備并發布 master 設計, 建立 BOM, 制定包裝規范；
- Update design according to customer/ internal change during development;
- 在開發過程中根據客戶新的輸入/內部需求更新設計
- Invite meeting for design review;
- 召集設計評審會議；
- Design DFMEA;
- 準備DFMEA；
- Coordinate whole system-including Heater/ VTB/ ACT/ ECU(set point)/ Material/ Blower(size, rotate speed and others in case system required) to make sure system interface is compatible during development change;
- 協調開發更改過程中，各個接口-包括 加熱墊/ 通風袋/ 線束/ 電子控制單元(調節溫度值)/ 原材料/ 風扇(尺寸，轉速和其他情況下系統要求)之間的配和及其他系統要求；
- Finalize significant and critical characteristics;
- 制定出SC/CC特性；
- Design interface parts between seat and system-including Heater/ VTB/ ACT/ Material/ Blower;
- 設計連接座椅和整個系統，包括Heater/VTB/ACT /Material/Blower的接口
2. Prototype: 樣品
- Release prototype drawing and create BOM in PDM;
- 釋放樣品圖紙并在PDM中建立 BOM 表
- Order prototypes;
- 訂購樣品；
- Participate sample production for each new level change for technical support;
- 參加每次新樣品的生產以做技術支持；
- Analysis problems during prototyping and implement improvement into product design;
- 分析樣品中的問題并實施到產品設計中；
- Support and evaluate for seat build for testing and customer show;
- 協助試驗或者展椅的制作；
3. DV Test: DV試驗
- Create and release DVP with Lab engineer and PM;
- 和試驗工程師及PM一起制定并release DVP；
- Issue test request;
-填寫試驗申請；
- Submit test sample/ seats to Test lab according to timeplan;
- 按照試驗時間提交試驗樣品/座椅
- Support test lab for testing set up;
- 協助試驗工程師進行試驗設置；
- Support test lab for related test equip build up;
- 協助試驗工程師進行相關試驗設備的制作；
- Support test lab for specification analysis;
- 協助試驗工程師分析試驗標準；
- Analysis test result and implement into design improvement;
- 進行試驗分析用于設計改進；
4. Transfer design: 轉移產品設計
- Invite meeting to evaluate master drawing and customer drawing from other location;
- 召集會議對轉過來的圖紙包括客戶圖紙進行評審；
- Feedback and coordinate technical change with lead designers of other location;
- 與主設計者反饋并協調技術更改；
5. Production Preparation準備生產
- Release production parts into PDM and copy into SAP, notify project team for maintain;
- 將要生產的parts釋放到PDM，復制到SAP中，并通知project team進行產品維護
- Complete PVP;
- 完成PVP
- Create and release PVP with Lab engineer and PM;
- 和試驗工程師及PM一起制定并release PVP；
- Issue test request;
- 填寫試驗申請；
- Submit test sample/ seats to Test lab according to timeplan;
- 按照試驗時間提交試驗樣品/座椅
- Support test lab for testing set up;
- 協助試驗工程師進行試驗設置；
- Support test lab for related test equip build up;
協助試驗工程師進行相關試驗設備的制作；
- Support test lab for specification analysis;
協助試驗工程師進行試驗標準的理解；
- Analysis test result and implement into design improvement;
進行試驗分析用于設計改進；
6. Trial Run: 試生產
- Participate trial run production of each start of process for technical support;
- 參與試生產每道工序的前期以提供技術支持；
- Analysis problems during trial run and improvement into product design;
- 分析試生產中的問題并實施到產品設計中；
- Zero Series / PPAP
- Participate Job 0 production for each new level change for technical support;
- 參與Job 0生產每道工序的前期以提供技術支持；
- Analysis problems during Job 0;
- 分析 Job 0生產中的問題；
- Create ECR and improvement into product design;
- 創建ECR并將改進實施到設計中；
? Design seat heaters/ comfort cools and prepare BOMs for calculation of new or updates quotations
設計加熱墊/通風舒適系統，準備材料設計清單，對新產品進行報價或更新已有報價
? Collect and maintain project relevant information and inform the respective departments (sales, quality, order center etc.)
收集和維護項目的相關信息，通知銷售，質量，訂單中心等相關部門
? Participate in Gentherm local or global teams
參加捷溫當?shù)睾腿虻捻?xiàng)目組
MINIMUM QUALIFICATIONS:
? Bachelor degree
學士學位
? Fluent English skill of speaking and wirting
流利的英語交流和書寫
? Mechanical and/or Electrical Engineering
機械類或電氣工程類專業/機械設計/自動化相關專業
? Know well about basic project management knowledge and give improvement suggestion through cost management/quality management/risk management
掌握項目管理基礎，能夠通過成本管理、質量管理以及風險管理對整個項目提出改善建議；
? Know well about the lean basic knowledge, identify the waste and lead relevant departments to do improvement work
掌握Lean Basic基礎知識；并能有效識別浪費帶領相關部門作出改善；
? Design the drawing independently
能夠獨立進行設計圖紙制作
? 3-5 years’ working experiences as a product design engineer in mechanical field.
3-5年汽車行業產品設計經驗
PREFERRED QUALIFICATIONS:
? Know well and applying the APQP、FMEA、 SPC、 MSA and PPAP of automotive industry quality tools
掌握APQP、FMEA、 SPC、 MSA和PPAP汽車行業質量工具知識以及應用；
? Know well about the SCIO software-FMEA
熟悉SCIO software-FMEA
? Know about the GD&T, and can identify the GC&T drawings/ GD&T
能夠讀懂產品GD&T的圖紙
? Well applying the CAD、CATIA 、UG to finish the product and technical confirmation
能夠熟練應用CAD、CATIA 、UG等工具完成產品需求與技術確認；
? Know well about the IATF 16949：2016 and design related terms requirements
熟悉IATF 16949：與設計相關的條款，了解客戶需求;
? Know well about the tolling design and management process
熟悉工具設計，以及工具設備的管理流程;
TRAVEL: Travel to work related supplier sites 出差到相關供應商
LEADERSHIP RESPONSIBLITIES: None
EMPLOYEE VALUE PROPOSITION OF GENTHERM:
? GLOBAL EXPOSURE: Across the world, Gentherm creates an inclusive work environment for all.
? HEALTH & WELLNESS: Perks in and out of the office to help you get the most out if life.
? ACCESSIBLE LEADERSHIP: The walls are torn down and the playing field is level. We're all working toward the same goals.
? TIME OFF: Recharge with generous paid time off, holidays and more.
? EMPLOYEE DISCOUNTS: Get more for your money with savings at many of the world's top retailers.
? TRAINING & EDUCATION: Our investment in your growth goes beyond what happens in the office.
工作地點
天津西青區電子城人工智能產業園6號樓9樓
相似職位
天津 - 津南
天津巴泰克汽車裝備有限公司- 汽車零部件項目工程師1.2-1.4萬·13薪
天津 - 河?xùn)|
金悅(天津)企業管理咨詢有限公司 - 應用工程師Application Engineer1-1.5萬·14薪
天津 - 北辰
克恩-里伯斯(太倉)有限公司 - 產品工程師8000-15000元·13薪
天津 - 寶坻
卡酷思汽車部件(天津)有限公司 - 車燈設計工程師1-1.5萬·14薪
天津 - 濱海新區
天津斯坦雷電氣科技有限公司 - 產品工程師(J10257)1-1.5萬·13薪
天津 - 東麗
天津大創科技有限公司
熱門公司推薦
- 霸王茶姬招聘
- 肯德基招聘
- 順豐招聘
- 美團招聘
- 京東招聘
- 餓了么招聘
- 比亞迪招聘
- 中國一汽招聘
- 北京汽車招聘
- 蔚來招聘
- 東風汽車招聘
- 長城汽車招聘
- 奇瑞汽車招聘
- 理想汽車招聘
- 長鑫存儲招聘
- 天江藥業招聘
- 藍月亮招聘
- 安踏招聘
- TCL招聘
- 海信招聘
- 聯想招聘
- ?？低曊衅?/a>
- 寧德時代招聘
- 中興招聘
- 新松招聘
- 京東方招聘
- 申通招聘
- 圓通招聘
- 中通招聘
- 百世物流招聘
- 德邦物流招聘
- 麥當勞招聘
- 星巴克招聘
- 海底撈招聘
- 蜜雪冰城招聘
- 瑞幸招聘
- 雀巢招聘
- 騰訊招聘
- 百度招聘
- 快手招聘
- 字節跳動招聘
- 新華網招聘
- 小米招聘
- 招商銀行招聘
- 中信銀行招聘
- 北京銀行招聘
- 興業銀行招聘
- 交通銀行招聘
- 建發集團招聘
- 中國移動招聘
- 中國聯通招聘
- 中國電信招聘
- 中糧集團招聘
- 國藥控股招聘
- 中廣核招聘
- 中國船舶招聘
- 強生中國招聘
- 匯豐中國招聘
- 宜家招聘
- 立邦中國招聘
- 伊利招聘
- 青島啤酒招聘
- 京港地鐵招聘
- 寶馬招聘
- 小鵬汽車招聘
- 華為招聘
- 特斯拉招聘
- 吉利招聘
- 奔馳招聘
- 海爾招聘
- 美的招聘
- 京東方招聘
- 施耐德電氣招聘
- 德邦物流招聘
職位發布者
歐睿韜/HRBP
三日內活躍立即溝通
捷溫汽車系統(中國)有限公司捷溫集團捷溫集團總部位于美國底特律（納斯達克代碼:THRM），是全球創新熱管理技術開發商和市場領導者、全球汽車零部件配套百?gòu)?qiáng)供應商。捷溫足跡遍布全球27家工廠，在13個國家雇有超過14,000名員工。作為熱電技術和氣動舒適領域的領航者，捷溫的汽車產品包括：氣候控制座椅、可加熱汽車內飾系統(包括加熱座椅、方向盤、扶手等部件)、電池性能解決方案、線束系統、腰托和按摩舒適解決方案、閥門系統技術及電子器件等。主要客戶包括：特斯拉、理想、比亞迪、長城、奔馳，奧迪，寶馬，大眾，通用，豐田，本田等。捷溫天津捷溫天津工廠新建于2024年，是捷溫扎根中國20年以來的第五家工廠，位于天津市西青經濟技術開發區。捷溫天津致力于打造全球研發生產基地、建設亞洲標桿工廠。工作環境安全舒適，管理正規人性化，注重人才保留及發展。我們?yōu)閱T工提供如下福利： 1六險一金； 2周末雙休； 3免費食堂； 4長期服務獎； 5年終獎； 6年度免費體檢； 7專業培訓； 8員工活動（年會，生日會，包餃子，年度旅游，節日/過年禮品等）公司地址：天津市西青區賽達六支路獲取更多信息，歡迎訪問公司官網 Technology to the next degree?善用科技舒適升級
公司主頁